Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Taurus TBS-350
Summary of Contents for Taurus TBS-350
- Page 1 350W Belt & Disc sanDer instrUctiOn ManUal MODel nUMBer tBs-350 article nUMBer BGM6019 aFter sales sUPPOrt tel: 07 3188 2025 WeB: HelPDesK@DUOns.cOM.aU After Sales Support TEL: 07 3188 2025 WEB: n26968 helpdesk duons BGM6019 Ma 1112-13.indd 1 13-12-2011 08:44:45...
- Page 2 Belt & Disc Sander Congratulations on choosing to buy a TAURUS® product. All products brought to you by TAURUS® are manufactured to the highest standards of performance and safety, and, as part of our philosophy of customer service and satisfaction, are backed by our comprehensive Year Warranty.
-
Page 3: General Information And Safety Instructions
Belt & Disc Sander General information and safety instructions page 3 Assembly page 7 Assembly and spare parts page 9 Features page 11 Operating instructions page 14 Frequently asked questions page 14 Other useful information page 15 GenerAl informAtion AnD SAfety inStructionS Warning! Read the enclosed safety warnings, the additional safety warnings and the instructions. -
Page 4: Safe Operation
Belt & Disc Sander “WARNING ! When using electric tools basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury including the following. Read all these instructions before attempting to operate this product and save these instructions”. - Page 5 Belt & Disc Sander - Never yank the cord to disconnect it from the socket. Keep the cord away from heat, oil and sharp edges. 12 - Secure work - Where possible use clamps or a vice to hold the work. It is safer than using your hand. 13 - Do not overreach - Keep proper footing and balance at all times.
- Page 6 Belt & Disc Sander 22 - Have your tool repaired by a qualified person - This electric tool complies with the relevant safety rules. Repairs should only be carried out by qualified persons using original spare parts, otherwise this may result in considerable danger to the user.
-
Page 7: Installation
Belt & Disc Sander using extension cables Only use an approved extension cable suitable for the power input of the machine. The minimum conductor size is 1.5 mm . When using a cable reel always unwind the reel completely. technical specifications Voltage 230 V ~ Frequency... - Page 8 Belt & Disc Sander Assembly Put the machine frame on its head and press the four rubber stops into the foot of the frame. Machine frame, aluminium disc (10) and work plate (12) are supplied in separate packaging. Push the aluminium disc on the shaft and fasten the disc with the socket bolt in the side of the disc (Fig.B - D).
- Page 9 Belt & Disc Sander • Push the sanding belt along both of the transport rollers, starting from the back of the machine. • Push the clamping handle completely to the left. Now the sanding belt should be completely tight. • Turn the transport roller exactly in a right angle to the direction of the sanding belts with the use of the winged nut at the right roller.
-
Page 10: Expanded View
Belt & Disc Sander 126146 Cover + dust extraction 126147 Mitre guide 40 + 41 126148 Driven pulley 126149 Rubber foot 63 - 66 126150 Switch 126151 V-belt 126152 Velcro sticker for Sander Disc expanded view After Sales Support TEL: 07 3188 2025 WEB: helpdesk duons... - Page 11 Belt & Disc Sander feAtureS 1. Machine frame 2. Motor 3. Roller stop and parallel stop 4. Clamping handle 5. Transport roller 6. Sanding belt On/off switch 8. Fence 9. Drive roller 10. Aluminium disc 11. Sanding disc 12. Work plate 13.
- Page 12 Belt & Disc Sander Fig. B Fig. C Fig. D Fig. E After Sales Support TEL: 07 3188 2025 WEB: helpdesk duons BGM6019 Ma 1112-13.indd 12 13-12-2011 08:44:48...
- Page 13 Belt & Disc Sander Fig. F Fig. G Fig. H After Sales Support TEL: 07 3188 2025 WEB: helpdesk duons BGM6019 Ma 1112-13.indd 13 13-12-2011 08:44:49...
-
Page 14: Switching On/Off
Belt & Disc Sander oPerAtinG inStructionS Switching on/off • Press the switch into position ‘1’ to put your sanding machine into operation. • To switch off the machine the same switch needs to be pressed to position ‘0’ . • Always keep the mains cable away from moving parts. -
Page 15: Warranty
Belt & Disc Sander other uSefull informAtion cleaning and maintenance Before cleaning and maintenance, always switch off the machine and remove the mains plug from the mains. • Regularly clean the housing with a soft cloth. • Keep the ventilation slots free from dust and dirt. If necessary, use a soft, moist cloth to remove dust and dirt from the ventilation slots. -
Page 16: Declaration Of Conformity
Belt & Disc Sander DeclArAtion of conformity (GB) We declare under our sole responsibility that this product is in conformity and accordance with the following standards and regulations: en61029-1, en55014-1, en55014-2, en61000-3-2, en61000-3-3 2006/42/ec, 2006/95/ec, 2004/108/ec, 2002/96/ec, 2002/95/ec Zwolle, 01-08-2011 I. - Page 17 Belt & Disc Sander After Sales Support TEL: 07 3188 2025 WEB: helpdesk duons BGM6019 Ma 1112-13.indd 17 13-12-2011 08:44:49...
- Page 18 Belt & Disc Sander After Sales Support TEL: 07 3188 2025 WEB: helpdesk duons BGM6019 Ma 1112-13.indd 18 13-12-2011 08:44:49...
- Page 19 Belt & Disc Sander After Sales Support TEL: 07 3188 2025 WEB: helpdesk duons BGM6019 Ma 1112-13.indd 19 13-12-2011 08:44:49...
- Page 20 1112-13 After Sales Support TEL: 07 3188 2025 WEB: helpdesk duons BGM6019 Ma 1112-13.indd 20 13-12-2011 08:44:49...
Need help?
Do you have a question about the TBS-350 and is the answer not in the manual?
Questions and answers