LOADRITE™ LP930 Printer User Manual
LP930 Printer User Manual
Document Number: MAN-81199-00
Issued Date: November 2011
E: info@loadritescales.com
W: www.loadritescales.com
A solution from
www.actronictechnologies.com
© 2011 Actronic Ltd. All rights reserved. Actronic Technologies, C-Weigh, Express, Loadrite, Pro, Road Boss and X-Weigh are trademarks
and/or registered trademarks of Actronic Ltd. All other trademarks and registrations are the property of their respective owners.
The software contains proprietary information of Actronic Ltd; it is provided under a license agreement containing restrictions on use and
disclosure and is also protected by copyright law. Reverse engineering of the software is prohibited.
This document is copyrighted with all rights reserved. Under copyright laws, this document may not be copied in whole or in part, reproduced in
any other media, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or
otherwise, without the express written permission of Actronic Ltd. Permitted copies must carry the same proprietary and copyright notices as
were affixed to the original. Under the law, copying includes translation into another language.
Published in New Zealand.
Disclaimer
Actronic Ltd operates a policy of on-going development. Please note that while every effort has been made to ensure that the data given in this
document is accurate, due to continued product development, the information, figures, illustrations, tables, specifications, and schematics
contained herein are subject to change without notice. Actronic Ltd does not warrant that this document is error-free. The screenshots and other
presentations shown in this manual may differ from the actual screens and presentations generated by the actual product. All such differences
are minor and the actual product will deliver the described functionality as presented in this document in all material respects. If you find any
errors in the document, please report them to us in writing.
Actronic Ltd assumes no liability in connection with the use of any LOADRITE™ branded product.
The LP930 is fully EMC (Electro-Magnetic Compatibility) compliant and is CE marked accordingly. A Declaration of Conformity, in accordance
with the EMC Directive 89/336/EEC (and as amended) is available from Actronic Ltd on request. The LP930 also carries an automotive e-mark
that applies, provided the printer is installed in-line with the directive.
1-1