Superscope PSD450mkII Quick Start Manual

PSD450mk
Digital Audio Recording System

Quick Start Guide

© Copyright 2013, Superscope Technologies, Inc.

Top Panel

INTERNAL MIC L
Use internal mics
to record without
additional equipment.
TRACK SELECT
Press to select a track
for playback, Edit, or
Overdub.
RECORD SETTINGS
Press to select an input,
recording folder, and
record format.
A-B LOOP
Press to set loop markers
and seamlessly loop a
section of audio.
MUSIC PRACTICE
TOOLS
Press to select
Metronome or Tuner or
to adjust Key, Tempo,
Fine Tune, or VR.
POWER
LOW BATTERY INDICATOR
Slide to turn power ON
Lights when battery power is low.
and OFF.
Jog Wheel/Joystick/ENTER
LCD COLOR DISPLAY INTERNAL MIC R
Various information is Use internal mics
shown here. to record without
additional equipment.
INTERNAL SPEAKER
EZ GUIDE
Press for assistance
operating the most
popular features.
CONTROL Buttons
(Transport)
・RECORD (REC)
・PREVIOUS/REC REVIEW
・PLAY/PAUSE
OVERDUB
・STOP
Press to layer sound
・NEXT
over an existing track.
MENU
Press to view menu options.
DELETE/CANCEL
Press to cancel settings and delete
files.
EDIT
Press to view edit options.
MAKE CD
Press to erase a CD-RW, or to burn,
finalize, or duplicate a CD.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
The lightning flash with arrowhead symbol within
an equilateral triangle is intended to alert the
user to the presence of uninsulated "dangerous
voltage" within the product's enclosure that may
be of sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE
BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
ATTENTION: POUR EVITER LES CHOC ELECTRIQUES, INTRODUIRE LA
LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE
DE LA PRISE ET POUSSER JUSQUíAU FOND.
CAUTION
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF
PROCEDURE OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT
IN HAZARDOUS EXPOSURE.
LASER SAFETY
This unit employs a laser. Only a qualified service person should
remove the cover or attempt to service this device, due to possible
eye injury.
NOTE TO CATV SYSTEM INSTALLER:
This reminder is provided to call the CATV (Cable-TV) system installer's
attention to Section 820-40 of the NEC which provides guidelines for
proper grounding and, in particular, specifies that the cable ground
shall be connected to the grounding system of the building, as close to
the point of cable entry as practical.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by tuning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
NOTE: Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numÈrique de la Classe B conforme à la norme NMB-003
du Canada.
Superscope Technologies, Inc.
1508 Batavia Ave.
Geneva, IL 60134-3302

Left Side Panel

DC Input Jack Type A USB
Connector
Connect the DA450PSD
AC to DC adapter here. Connect a USB flash drive
Do not use any adapter here for file transfer
other than the DA450PSD. or direct recording.
Type B USB FOOT PEDAL Jack
Connector
Connect an optional foot
Connect a USB cable here pedal here to provide
to transfer data between Play/Pause or Record/
a computer and the Pause control.
internal memory.
USB Switch Digital Input/Output
Switch operation between Connect digital equipment
a computer (type B) and to the top terminal for
flash drive (type A). recording. A 44.1kHz signal
is output from the bottom
terminal.

Front Panel

PHANTOM Power MIC ATT ON/OFF
ON/OFF SWITCH
Switch on to add 15dB of
Switch on to supply attenuation to mic
48V phantom power to inputs.
condenser microphones.
Infrared (IR)
Receiver
The infrared receiver
detects signals from
the wireless remote
controller.
CD-RW Drive EJECT Button Left MIC / LINE
Level Control
Insert discs for Press to eject a
playback, transfer, or compact disc from the Turn this knob to
burning. CD-RW drive. adjust the left MIC/
LINE input level.
■Important Safety
Instructions
READ BEFORE OPERATING EQUIPMENT
This product was designed and manufactured to meet strict quality
and safety standards. There are, however, some installation and
operation precautions which you should be particularly aware of.
1. Read instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Clean only with dry cloth.
6. Do not use this apparatus near water.
7. To ventilate the unit, do not install it in a rack or bookshelf, and
note the following: Do not insert objects beneath the unit. Do not
block ventilation slots at the top of the unit. Do not place anything
about 1 meter above the top panel. Make a space of about 8" (20
cm) around the unit.
8. Do not install near nay heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-
type plug. A polarized plug has two blades with one wider than
the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided
for your safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
11. Only use attachments/accessories specified by
the manufacturer.
12. Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or
sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for
long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has
been dropped.
Additional Safety Information!
• This product should not be placed in a built-in installation such
as a bookcase or rack unless proper ventilation is provided or the
manufacturer's instructions have been adhered to.
• Apparatus shall not be exposed to dripping or splashing and that
no objects filled with liquids, such as vases, shall be placed on the
apparatus.
• When the switch is in the OFF position, the apparatus isn't
completely switched-off from the MAINS.
WARNINGS
Do not expose the equipment to rain or moisture.
Do not remove the cover from the equipment.
No naked flame sources, such as lighted candles, should be placed on the equipment.
Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
Set the unit up on an even surface away from direct sunlight, high
temperatures, high humidity, and excessive vibration.
Do not place heavy items on the unit.
Do not use high voltage power sources. This can overload the unit and cause a fire.
Do not handle the plug with wet hands. This can cause electric shock.
Do not let metal objects fall inside the unit.
Do not let liquids get into the unit.
Do not spray insecticides onto or into the unit.
Do not attempt to repair this unit by yourself.
"Perchlorate Material - special handling may apply,
See www.dtsc.ca.gov/hazardouswaste/perchlorate."
Phone: 630-232-8900 Fax: 630-232-8905
www.SuperscopeTechnologies.com
sales@SuperscopeTechnologies.com
10/2013 00M67AA851010
Printed in Japan

Right Side Panel

INST IN Jack AUX LEVEL
Connect an Turn this knob to
electric guitar, adjust the input
bass, or keyboard signal level of the
here. AUX IN.
Left / XLR / 1/4" AUX IN Jacks
Input Jack
Use these inputs when
Connect microphones or connecting line level
line level equipment with equipment such as CD
XLR or 1/4" inch plugs players or mixing boards.
here.
Right / XLR / 1/4" LINE OUT Jacks
Input Jack
Connect these outputs
Connect microphones or to the inputs of another
line level equipment with audio device, such as
XLR or 1/4" inch plugs an amplifier or mixing
here. board.
RECORD LEVEL PHONES / SPEAKER
MAN / LIM / ALC LEVEL
Select method for Turn this knob to adjust
controlling record levels the level for the speaker
here. and headphones.
PHONES Jack
Connect stereo
headphones here.
Right MIC / LINE INST (Instrument)
Level Control Level Control
Turn this knob to Turn this knob to adjust
adjust the right MIC/ the level of the INST
LINE input level. input.