Philips HTS5110 Service Manual page 2

1. Technical Specifications and Connection Facilities
1.1 PCB Locations
Main Unit
Touch Board-1
1.2 General:
Power supply
Power consumption
Standby power consumption
1.3 Radio
Tuning Frequency Range
Antenna Level for 40dB luminance
S/N (video unweighted) at 75Ω
Automatic Search Tuning:
Scanning time auto search without
RF Signal
Stop level (vision carrier)
Maximum tuning error during
operation (drift)
Maximum tuning error of a recalled
program :
Tuning Principles:
Automatic system recognition
Technical Specifications and Connection Facilities
Decoder Board
USB Board
Radio Transmit
Board
Subwoofer
: 100-240V, ~50 Hz
: 35 W
: < 1 W
: 87.5 MHz – 108 MHz
: ≤ 71dBμV (High End)
≤ 50dBμV (Low End)
: < 2.5 min.
(Typical 3 minutes)
: ≥ 31dBμV
: ≤ 50kHz
± 22.5 kHz
Touch Board-2
VFD Display Board
Power Board
Radio Receiver
Board
1.4 Analog Inputs/Outputs
1.4.1 MP3 LINK IN of Cinch connector to be used for
measurements(direct input from Front end)
MP3 LINK Performance:
Frequency Response
Input and output voltages
1.4.2 Video Rear output Connector
CVBS output:
DC Level
Amplitude output:
1-1
Power Control
Switch 110/220V
(for 55/98version)
: -1 ± 3dB (150 to 20KHz)
: 500 mV / 20 kOhm
: 0V+1V
: 1.04V