White Light Led; Call Button (Ppic35520 Only); Rfid Reader (Ppic35520 Only) - Abus PPIC32020 User Manual

3.3. White light LED

PPIC35520
LED
White light LED
ring

3.4. Call button (PPIC35520 only)

Pressing the call button triggers the following response from the intercom system:

Call triggered

Relay for external doorbell (C2/C1) is triggered

The white LED ring begins to flash

3.5. RFID Reader (PPIC35520 only)

You can program and use the ABUS AZ5502 proximity chips in the intercom with the help of the built-
in RFID reader. The RFID reader is located behind the loudspeaker, just above the call button.
To do this, enable programming in the intercom's advanced settings and hold the chip in front of the
intercom until you hear a beeping sound and the app displays the next step.
You can perform different actions by using the chip in different ways.
Response
Use
Hold the chip just in front
of the RFID reader for
one second
Hold the chip in front of
the RFID reader until
there is a response.
Status
Connection to intercom established / call
On
accepted
Flashing Call button has been pressed, call waiting
Off No active connection
Response
Beeps 1x Relay (B2/B1) triggered
Chip could not be read
Beeps 3x
Chip not recognised
Beeps 2x -
Chip could not be read
Beeps 3x
Chip not recognised
10
English
Description
Action