Manual Tuning - Fm - Roberts Ecologic 3 User Manual

Manual tuning - FM

1. Press the On/Off button to switch on your radio.
2. Press the Band button to select the FM band. Fully extend the
Telescopic aerial.
3. Press and release the Select button until the display shows "Manual
tune <>".
4. Press either of the Tuning Up or Down buttons to tune to a station.
The frequency will change in steps of 50kHz.
5. When the waveband end is reached the radio will recommence tuning
from the opposite waveband end.
6. Set the Volume and Tone controls to the required setting.
7. To switch off your radio press the On/Off button.
15
1
2
3
4
4