Remove The C2-Board - Panasonic TH-50PX600U Service Manual

TH-50PX600U

6.21. Remove the C2-Board

1. Remove the flexible cables holder fastening screws (×8
).
2. Disconnect the flexible cables (CA4, CA5, CA6 and CA7).
3. Disconnect the flexible cables (C20, C21 and C22).
4. Remove the screws (×5
6.22. Remove the C3-Board
1. Remove the flexible cables holder fastening screws (×8
).
2. Disconnect the flexible cables (CA8, CA9, CA10 and
CA11).
3. Disconnect the flexible cables (C31 and C32).
4. Disconnect the coupler (C33).
5. Remove the screws (×5
) and remove the C2-Board.
) and remove the C3-Board.
6.23. Remove the stand brackets
1. Remove the plasma panel section from the servicing stand
and lay on a fiat surface such as a table (covered) with the
plasma panel surface facing downward.
2. Remove the stand brackets (left, right) fastening screws (×6
each) and remove the stand brackets (left, right).
6.24. Remove the C4-Board
1. Remove the stand bracket (left). (See section 6.23.)
2. Remove the flexible cables holder fastening screws (×8
).
3. Disconnect the flexible cables (CB8, CB9, CB10 and
CB11).
4. Disconnect the flexible cables (C41 and C42).
5. Disconnect the couplers (C43 and C44).
6. Remove the screws (×5
16
) and remove the C4-Board.