Philips HTS5220/12 Service Manual page 12

DISASSEMBLY INSTRUCTIONS
Dismantling of Rear Panel
1) Push the cable door to remove it as shown in fi gure 1.
2) Loosen 2 screws "A" to remove footstand ass'y as shown in fi gure 2.
3) Loosen 9 screws "B" to remove rear panel as shown in fi gure 3.
3 - 1
PUSH
Figure 1
A
Figure 2
B
Figure 3
Dismantling of VFD+LED+TOUCH+Door LED PCB
1) Loosen 7 screws "C" on the bracket to remove front cabinet as shown in fi gure 4.
2) Loosen 3 screws "D" to remove the VFD PCB as shown in fi gure 5.
3) Loosen 2 screws "E" to remove the LED PCB as shown in fi gure 6.
4) Loosen 4 screws "F" on the bracket to remove the TOUCH PCB as shown in fi gure 7.
5) Loosen 2 screws "G" to remove the Door LED PCB as shown in fi gure 8
E
Figure 6
3 - 1
C
Figure 4
D
Figure 5
G
Figure 7
F
Figure 8