Download Print this page

Sonic Modell P-51 Mustang User Manual

R/c model

Advertisement

Quick Links

The CG of this model
Note: The ser vos have not been installed in the main wing to avoid scrape inside the
package, please glue the ser vos when assemble the model.
Disclaimer of Liability
※ For ages 14 and up. Keep the plane away from face, eyes and fingers.
Do not touch the rotating propellers at any time.
Do not fly the plane near people, animals,buildings, trees or overhead wires.
The user understands that any and all items in this product and their operations
including: motors, propellers, ESC, lithium batteries, ser vos, charger, transmitter and
receiver, and the combined systems and/or operations of these items/systems can be
dangerous if used or handled improperly.A thorough understanding is necessar y before
the user handles the items and/or operates the systems in this product. SonicModell R/C
Hobby Co., LTD. cannot be responsible for any improper use or handling of this product
and its component items by the user. The user waives all claims of damages against
SonicModell R/C Hobby Co., LTD. for any and all damages arising from the use of this
product by the user, including, but not limited to, any bodily injuries or property
damages sustained as a direct or indirect result of the user 's use of this product.
4
User Manual for
P-51 Mustang R/C Model
Wingspan: 1200mm
Flying Weight: 1300g
Motor : Brushless 800KV
Batter y: 11.1V 2200mah Lipo
Propeller : 4 Blade prop.( 10*8)
Control Panel Voltage: Less than 14.8V
Retract System: Ser voless retractable landing gear system
www.sonicmodell.com
Length: 1065mm
R/C: 2.4 GHz 6 Channel
ESC: 30A Brushless ESC
Ser vo: 9g * 4pcs
Material: Durable EPO

Advertisement

loading
Need help?

Need help?

Do you have a question about the P-51 Mustang and is the answer not in the manual?

Questions and answers

Summary of Contents for Sonic Modell P-51 Mustang

  • Page 1 The CG of this model User Manual for P-51 Mustang R/C Model Note: The ser vos have not been installed in the main wing to avoid scrape inside the package, please glue the ser vos when assemble the model. Disclaimer of Liability...
  • Page 2 Installation Guide Glue the elevator and rudder to the fuselage Insert the strengthening stick into the main wing, then apply glue in the connection surface of the left / right wing Assemble the propeller and make sure the nut is tightened Glue the both wings Glue the plastic part on the wing Install the spinner...