Automatic Icemaker - GE PSB42 Owner's Manual & Installation Instructions

Automatic Icemaker

A newly-installed refrigerator may take 12–24 hours to begin making ice.
Automatic Icemaker
Power
Switch
The icemaker will produce seven cubes per cycle—
approximately 15 cycles in a 24-hour period, depending
number of door openings and other use conditions.
is made to the icemaker, set the power switch on the
icemaker to OFF.
Important Facts About Your Icemaker
fills with water.
Throw away the first few batches of ice to allow the water
line to clear.
Be sure nothing interferes with the sweep of the feeler
arm.
When the bin fills to the level of the feeler arm, the
cubes to be joined together.
cloudy, taste stale and shrink.
NOTE:
you may hear the icemaker cycle multiple times when
making one batch of ice.
8
When the refrigerator has been connected to the water
supply, set the power switch on the icemaker to ON.
off using the power switch on the icemaker or by using
the Ice Maker
control panel to turn the icemaker off you will have to use
the control panel to turn it back on. The same is true for the
power switch on the icemaker.
CAUTION
Avoid contact with the moving
parts of the ejector mechanism, or with the heating
element (located on the bottom of the ice maker) that
releases the cubes. Do not place fingers or hands
on the automatic ice making mechanism while the
refrigerator is plugged in.
49-60742-4