Care And Maintenance - NuTone ILF120 Installation Instructions Manual

FIGURE 2
FIGURE 3
KEEP DUCT
RUNS SHORT &
USE INSULATED
DUCT IN
UNCONDITIONED
SPACES
AIR FLOW
CEILING JOIST
SEAL GAPS
AROUND SLEEVE
DUCTING INSTALLATION
NuTone puts everything within reach.
WIRING
CONNECTIONS
ROOF OR
WALL CAP
SEAL DUCT
TO FAN WITH
DUCT TAPE
DAMPERED SLEEVE
INLET GRILLE
INSTALLATION IN EXISTING
CONSTRUCTION
Installing in an existing building requires access to the attic or space
above the planned installation.
Carefully examine the installation area to be sure that;
1. Ducting can be installed.
2. Wiring can be run to the planned location.
3. No wiring or other obstructions might interfere with installation.
Install fan and ducting following the instructions in "Installation in a
New Construction Site".

CARE AND MAINTENANCE

1. No regular maintenance is required.
2
Check out the collection of RV hardware we offer.
Rev. 01/14, Part No. 100933E