Advertisement
Quick Links
Advertisement
Related Manuals for Saramonic Vmic
Summary of Contents for Saramonic Vmic
- Page 1 Vmic Recorder Shotgun Microphone and Audio Recorder For DSLR Cameras and Video Cameras...
- Page 2 Please save it for your future reference. If the user manual can not help you to solve certain problems, please ask your retailer for help or email us: info@saramonic.com. Cautions 1. Do not use the unit under water, don't expose it to rain. Please store it in a cool, dry place.
- Page 3 It features one-button recording and easy-to-read menu display, making your recording work much easier. The detachable 3.5mm cable connects the Vmic Recorder to your camera's audio input, while the stereo headphone output allows you to monitor incoming audio. The shock mount system provides isolation from vibration and mechanical noise.
- Page 4 3. Product Structure Foam windshield Battery and memory card compartment Camera shoe mount Integrated shock mount system Audio output jack Headphone jack Control panel...
- Page 5 To remove: Press the card to unlock it, then pull it out from the card slot. Note: Vmic Recorder can still work as a microphone even if there is no memory card installed. Please make sure the power is off when you insert or remove the memory...
- Page 6 LCD screen will show “low power” and the unit will turn off automatically. 4.2 Attach the Vmic Recorder to the hot shoe of your camera or camcorder. Connect the supplied audio transmission cable from the audio output to the MIC input of your camera or camcorder.
- Page 7 5.2 Control Panel Adjusting Indication On Recording On Playback Control Panel On Main Menu On Submenu Screen Screen Play previous Left Exit the submenu audio Set low cut Delete (only active on submenu of Right Play next audio on/off “FILE”) •...
- Page 8 Record Pause Stop Play Folder name. Vmic Recorder allows you to create maximum 9 folders, every folder can accommodate 200 wav files. The screen shows now you are recording No.002 wav file, the wav file will be stored in FOLDER01.
-
Page 9: Recording Screen
5.4 Audio Path Audio output Headphone output Gain Low-cut Filter Recording to memory card Note: If you want to record the audio into your camera, please make sure the Vmic Recorder is on recording screen. 6. Operating Menu MENU SUBMENU 1 FILE FOLDER01 REC-001.wav... - Page 10 Note: Once audio files have been deleted, they cannot be recovered. • INPUT: Set low cut filter. Default setting is low cut off. low cut on: Vmic Recorder will filter audio signal that lower than 200hz to reduce noises. low cut off: Record original audio.
- Page 11 Set LCD contrast. Default setting is 3. Set LCD screen contrast from 1 to 5. In LCD contrast screen, press joystick up/down to adjust contrast level. Then press left to exit. version: version of Vmic Recorder. factory rst: Restore the factory settings.
- Page 12 4. The LCD Screen will light up and show “APP Updating...” 5. About 6 seconds later, it will show “ Update Succeed !” 6. The Vmic Recorder will automatically run on the updated program and is ready to use. 7. If any error occurs, please try again from step 1.
-
Page 13: Specifications
8. Specifications 8.1 Technical Specifications Type Condenser Microphone Polar Pattern Supercardioid Recording Format WAV, 16bit/24bit, 24kHz/48kHz Sampling Rate Frequency Response 50 HZ to 20 kHZ Maximum SPL 0 dB Gain Setting, 1 kHz at 1% THD, 1000 Ω load 110 dB SPL Signal to Noise Ratio +30 dB Gain Setting 78 dB Operating Temperature Range... - Page 14 8.2 Frequency Response 8.3 Polar Pattern...
- Page 15 9. Packing List • One Vmic Recorder unit • One pop wind shield • One 3.5mm audio transmission cable • User manual • Warranty card...
- Page 16 The Saramonic logo is trademark which is registered and owned by Saramonic International. COPYRIGHT 2011-2021 SARAMONIC INTERNATIONAL ( A brand of DSQN ) Email: info @ saramonic.com...
- Page 17 Vmic Recorder 说明书 1： 1 Vmic Recorder 说明书 105 克哑粉纸 骑马钉 16P 1F140150036 尺寸：127x127mm 贺磊 /2015-8-17...