Button Controls - Jaybird JB200 User Manual

E NGLI S H

Button Controls

Power On: Press and hold the power/talk button for 5 seconds until blue LED fl ashes blue
rapidly. Once on, the headset LED will fl ash blue once every few seconds.
Power Off : Press and hold the power/talk button for 6 seconds until blue LED fl ashes blue
rapidly. Once off , the headset LED will no longer fl ash.
Pairing (in power on state): With headset already on, press and hold the power/talk
button for 4 seconds until LED fl ashes red and blue. The headset is ready to pair
with your phone or music device
Auto power off : The device will automatically turn off after 10 minutes if not connected
to another device.
Music & Phone Mode: The headset is in music mode by default and will switch to phone
mode when:
• You answer a call by pressing the power/talk button
• Reject a call by pressing and holding power/talk button for 2 seconds
• Redial a call by pressing and holding power/talk button for 2 seconds
Play / Pause: Short press/release of the power/talk button will toggle between play and
pause in music mode.
Previous / Next track: Short press/release of the volume up/down button will skip to
the previous/next song in music mode. This button function has no eff ect in phone
mode.
Volume: Press AND HOLD the volume up/down button will increase/decrease the volume
in both phone and music mode.
Speakers: During phone calls the right speaker is muted. During music play back the right
speaker is enabled for stereo sound. This is common in Bluetooth® "stereo" headsets
to avoid feedback from the mic with dual speaker output.
5