Specifications; Safety Features; Appliance Specifications - Rinnai EX08C (RHFE-202FTA) Operation And Installation Manual

Gas direct vent wall furnace
Table of Contents

Advertisement

Available languages

Available languages

Safety Features

• Overheat: The appliance will automatically shut
down when the appliance exceeds a predetermined
temperature.
• Flame Failure: The appliance will automatically
shut down if the burner flame is extinguished.
• Power Failure: The appliance will shut off the gas
if it loses electrical power.

Appliance Specifications

Application
General Description
Operation
Gas Connection
Gas Control
Burners
Temperature Control
Ignition System
Flue System
Humidifier Tray
Electrical Connection
Standby Power
Weight
Noise Level
AFUE Rating
Rinnai is continually updating and improving products. Therefore, specifications are subject to change without
prior notice.
The efficiency rating of this appliance is a product thermal efficiency rating determined under continuous operating
conditions and was determined independently of any installed system.
4

Specifications

EX08C
For manufactured home (USA only) or mobile home or residential installation
convertible for use with natural gas and liquefied petroleum gases (propane / LPG)
when provision is made for the simple conversion from one gas type to the other.
For commercial setting.
For installation at altitudes up to 10,200 feet (3109 m).
Forced combustion, forced convection, flued gas furnace
Push button electronic
1/2 in male NPT
Electronic
Stainless steel Bunsen burner
Electronic thermostat, (Low, 60-80ºF in 2ºF increments, High)
Electronic spark ignition
The flue must be terminated to atmosphere with only flue components listed with the
appliance's certification. Warranty will be voided if non listed components are
installed.
Capacity - 1.5 pints (700 cc)
AC 120V, 60 Hz, 41 watts
0.5 watt
46 lbs (21 kg)
27-36 dB
Natural Gas: 81%
Propane: 82%
Rinnai Corporation EX08C, EX11C Manual
• Power Surge Fuse: A glass fuse on the PC board
protects against overcurrent. If the fuse blows then
all indicator lamps will be off.
• Spark Detector: The appliance automatically shuts
down if there is an abnormal spark at ignition.
• Fusible Link: In case the overheat feature does
not prevent an overheat then the fusible link could
break, shutting off the appliance.
AC 120V, 60 Hz, 44 watts
31-38 dB
Natural Gas: 80%
Propane: 81%
EX11C

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents