Setting The Declination Angle - barigo E7S Operating Instructions Manual

BARIGO – Makes
the Difference
6.4

Setting the declination angle

To allow your watch to display the points of the compass precisely
with respect to the geographical North Pole, we recommend you
enter the declination angle.
Your BARIGO E7/E7S automatically goes to the entry of the declina-
tion angle after successful calibration of the compass (see Fig. C,
page 66).
Press the S1 or S2 button to select "E" or "W" based on the declina-
tion table. Confirm your selection by pressing the S2 button. Next,
enter the corresponding angle for the magnetic declination by
pressing the S1 or S3 button. Then confirm your entry by pressing
the S2 button.
The compass on your BARIGO E7/E7S is now ready to use. Press
the S4 button twice to return to watch mode (normal mode).
To launch the compass function press the S2 button.
71