LG 47LV35A Easy Setup Manual page 11

How to Join Sets
47LV35A
1
Join other sets using screws for fixing the
VESA wall mount in the same way as above.
Set 4 joined to the rest of the sets
(2 x 2 tiling)
2
After joining the sets, use the tiling guide to
adjust the gap between the sets.
3
Now the 2 x 2 tiling is complete. You can tile in
various combinations, such as 3 x 3.
NOTE
The load applied to each set should be supported by the wall mount plate or the wall using a VESA
wall mount (600 x 400).
The load applied to each set should be supported by the wall mount plate using a VESA wall mount.
(Each set must be firmly mounted to the wall mount plate or the wall.)
You may mount the set without using the tiling guide; this does not affect the performance of the
device.
Loosen the screws on the set to install the tiling guides. (The screws are enclosed with the other
components in the box, including the tiling guides.)
55LV35A
1
Join other sets using screws for fixing the
VESA wall mount in the same way as above.
Set 4 joined to the rest of the sets
(2 x 2 tiling)
2
After joining the sets, use the tiling guide to
adjust the gap between the sets.
3
Now the 2 x 2 tiling is complete. You can tile in
various combinations, such as 3 x 3.
11
TILING DISPLAYS