Using PeripheralVision
11.22.33.44
IP Address
TCP/IP Subnet Mask
to Configure the IP Router
®
Full Installation and operational procedures for
PeripheralVision
®
manual accompanying the Installation CD, refer
to this if any problems are encountered in the
procedure detailed below.
Install PeripheralVision
One. Using the Locate NPMP
PeripheralVision
address (11.22.33.44). The IP router will appear
on the network map, it will be an icon similar to
the example on the left.
Left click twice on the icon to open up the property
Pages of the device. Using the arrows in the top
right corner, scroll the pages and click on the first
IP Router page. This is shown below.
The following information needs to be entered
onto this page (this will be supplied by your
network administrator).
Enter here the router's IP address for Network 1.
Enter here the subnet mask for Network 1.
are dealt with in the separate
®
onto a PC on Network
TM
discovery tool in
®
, enter the default set IP
5