Advertisement
!
WARNING
Burner should ignite within 4 seconds.
If burner does not ignite within 4
seconds turn control knob to OFF
position and follow directions in
Adjusting Surface Burner Flame
section. Try burner again. If burner still
does not ignite in 4 seconds, contact an
authorized servicer.
!
WARNING
Although the system that lights the
burners is electric, surface burners can
be ignited during a power outage.
Never attempt to light grill burner
(for grill or griddle use) during a
power failure.
1. Hold match at base of desired
surface burner.
2. Push in burner control knob and
turn to LITE position.
3. After gas ignites, remove match
from burner and turn burner control
knob to desired setting.
SURFACE ELEMENT
CONTROL SETTINGS
LO
MED
HI
WHEN TO USE SETTING
Use to prepare food at less than boiling
temperatures or to simmer.
Use to maintain boiling of larger amounts of food,
low temperature frying.
Use to bring food to boiling temperatures. When
food is boiling temperature setting should be
reduced to LO through MED.
Advertisement
