Computer Running Windows 7 - AmazonBasics UBHS-H5 Quick Setup Manual

Quick Setup Guide
H
ow to pairing the UBHS-H5

▮ Computer running Windows 7 :

Note: Before you pair the headset with the computer, make sure the computer is equipped
with a Bluetooth radio. Refer to the computer's documentation or contact the computer
manufacturer for more information. If you do not have a Bluetooth radio, install a Bluetooth f t f
USB adapter (dongle).
1 Turn on Bluetooth on the computer. For instructions, see the
computer's documentation or contact the computer manufacturer.
2 Double-click the Bluetooth icon in the system tray, near the clock.
3 Click Add a device.
4 With the headset turned off, press and hold Talk for six seconds. The
LED blinks blue and red rapidly and pairing mode is activated.
5 Double-click the UBHS-H5 icon on the computer or highlight the icon
and click Next.
6 Click Close after the headset has been paired.
Note: To use the headset, it must be selected as default recording and playback device on N t T th h
the computer.
7 Click Start, then click Control Panel.
8 Click Hardware and Sound, then under Sound, click Manage audio
devices.
9 On the Recording tab, select Headset Microphone Bluetooth Hands-
free Audio, then click Set Default.
10 On the Playback tab, select Headset Bluetooth Hands-free Audio,
then click Set Default.
11 Click OK.
i f ti If d
d t it t b l t d
g ,
t h Bl t th di
d f lt di
p
UBHS-H5
i t ll Bl t th
d l b k d i