Quick Setup Guide
UBHS-H5
H
ow to pairing the UBHS-H5
Computer running Windows XP :
▮
Note: Before you pair the headset with the computer, make sure the computer is equipped
with a Bluetooth radio. Refer to the computer's documentation or contact the computer
manufacturer for more information. If you do not have a Bluetooth radio, install a Bluetooth
manufacturer for more information. If you do not have a Bluetooth radio, install a Bluetooth
USB adapter (dongle).
1 Turn on Bluetooth on the computer. For instructions, see the computer's
documentation or contact the computer manufacturer.
2 Double-click the Bluetooth icon in the system tray, near the clock. My Bluetooth
Places opens.
3 Click Add a New Bluetooth Device. The Add Bluetooth Device Wizard opens.
4 Click Next.
5 With the headset turned off, press and hold Talk for six seconds. The LED blinks
blue and red rapidly and pairing mode is activated.
6 Double-click the UBHS-H5 icon on the computer or highlight the icon and click
Next.
Note: If you are unable to locate the UBHS-H5 icon, click the Search Again button.
7 Select one of the Bluetooth hands-free types shown on the Add a Bluetooth
Device Wizard screen, and click Next.
8 Select the services shown on the wizard screen to use with your Bluetooth
headset, then click Finish.
9 To connect the device, double-click the MAB2 Hands-Free Unit icon or the
UBHS-H5 Stereo Audio icon.
Note: To use the headset, it must be selected as the default recording and playback
device on the computer.
10 Click Start, then click Control Panel.
11 Click Sounds, Speech, and Audio Devices.
12 Click the Sounds and Audio Devices icon.
13 On the Audio tab, select Bluetooth Hands-free Audio or Bluetooth Stereo Audio
in the Sound recording list, and select Bluetooth Hands-free Audio in the Sound
playback list, if it is an option.
Need help?
Do you have a question about the UBHS-H5 and is the answer not in the manual?