Basic Formats - Panasonic GT02 Manual

4.1.4 Basic Formats

Command
This is a message to be sent to the GT from the external device. Create this command according to the
format on the computer.
Response
This is a message to be sent back to the external device from the GT when a readout command was
sent. Analyze this message according to the format, and check the operation results, or retrieve the data.
For write commands, there is no response (confirmation for the write result).
(2) In normal condition:
(2) When an error occurred:
Message
This is a message to be sent to the external device when the switch operation was performed on the GT.
Analyze this message according to the format, and check the operation results, or retrieve the data.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com