LED Mini Moving Head should fail, contact Adkins Pro Lighting. Introduction The Adkins Lighting LED Mini Moving Head is a high quality, high power, intelligent, DMX Light fixture. This fixture can be used in standalone mode, DMX Controller mode or connected in a Master/Slave configuration. Please read these instructions carefully to familiarize yourself with the basic operations of this unit.
5 or 13 DMX channels. To set the DMX starting LED Mini Moving Head channel address press the MODE button until you see A--- , then use the UP and DOWN buttons to select the desired starting address, then press the ENTER button to save. DMX starting address can be A001 - A512.
4.2 Main Function MENU function A001 DMX512 / slave mode(to select channel mode by to press enter button) soud Sound mode Run0. slou Slow auto program fast Fast auto program CoLr To select RGBW dimming StEP To adjust PAN/ TILT position Reverse rpan Reverse...
13 Channel Mode: Channel Value Function 0-255 0-255 PAN FINE 0-255 TILT 0-255 TILT FINE 0-255 PAN / TILT speed None 8-134 All light(RGBW) are dimmer 0-100% (CH11=0) 135-239 Strobe 240-255 CH7~CH10 affectivity 0-255 Red dimmer 0-100% 0-255 Green dimmer 0-100% 0-255 Blue dimmer 0-100% CH10...
2. The motor’s drive IC on the PCB might be out of condition. Customer Support: Adkins Pro Lighting provides a customer support line, to provide set up help and to answer any question should you encounter problems during your set up or initial operation. You may also visit us on the web at www.adkinsprolighting.com for any comments or suggestions.