Adkins WIRELESS-HEX-9 User Manual

Adkins WIRELESS-HEX-9 User Manual

Battery powered wireless up-light

Advertisement

Quick Links

WIRELESS-HEX-9
Battery Powered Wireless Up-Light
Led Colors: Red, Green, Blue, Amber, White, UV
USER MANUAL
Voice: (330) 436-3260 Fax: (330) 436-3283
E-mail: support@adkinsprolighting.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WIRELESS-HEX-9 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Adkins WIRELESS-HEX-9

  • Page 1 WIRELESS-HEX-9 Battery Powered Wireless Up-Light Led Colors: Red, Green, Blue, Amber, White, UV USER MANUAL Voice: (330) 436-3260 Fax: (330) 436-3283 E-mail: support@adkinsprolighting.com...
  • Page 2 Introduction Unpacking: Thank you for purchasing the WIRELESS-HEX-9 Battery Powered Wireless DMX Flat Par Up-Light by Adkins Professional Lighting. Every WIRELESS-HEX-9 has been thoroughly tested and has been shipped in perfect operating condition. Carefully check the shipping carton for damage that may have occurred during shipping. If the carton appears to be damaged, carefully inspect your fixture for any damage and be sure all accessories necessary to operate the unit has arrived intact.
  • Page 3 red/green charge indicator: Red = charging Green = not charging. At the same time, if the switch for power is “on”, the light will be at work during the process of charge, but will consume some power from the charge; if the switch for power is “off”, the light will be blackout and not be at work.
  • Page 4 Led Operation Menu - Touch Buttons There are four touch buttons under the LED Alpha-numerical display: Menu, Down, Up, Enter. Normally, the LED will display the current DMX address code of the fixture. At this time, press Menu to choose the function you want to set up. Press and hold Up or Down to fast scroll within the menu options.
  • Page 5 Static Color without a controller Press "Menu" until the display reads "CL01" - Press "enter" Setting Light to work with the Adkins EZ-Control 5 Press “Menu” until the display reads “d001” You may need to us the up & down to change the number to 001 Make sure your wireless on the controller is set to the same color as the light fixture.
  • Page 6 DMX Mode: There are two DMX modes 6 Channel and 10 Channel. Below is a chart showing the attributes of each. Channels 6 Channel mode 10 Channel mode 0 No action,1-255 RED dimmer 0 No action,1-255 Master dimmer 0 No action, 1-255 GREEN dimmer 0 No action,1-255 RED dimmer 0 No action,1-255 BLUE dimmer 0 No action,1-255 GREEN dimmer...
  • Page 7 Adkins Pro Lighting. Customer Support: Adkins Pro Lighting provides a customer support line, to provide set up help and to answer any question should you encounter problems during your set up or initial operation. You may also visit us on the web at www.adkinsprolighting.com for any comments or suggestions.

Table of Contents