GMC Tech 2 User Manual page 63

SECTION VIIA
5. Using soft keys, the min/max values of a highlighted data
parameter can be edited in several ways.
a. Selecting Change Min/Max allows the minimum and
maximum values of a data parameter to be changed.
b. Edit Min and Edit Max enables the keypad to be used to
set the minimum and maximum values respectively. The
value also can be assigned a positive or negative value.
c. Selecting Learn and Learn All allows the Tech 2 to learn
the min/max values of a highlighted parameter or of all
selected parameters.
d. Selecting Restore Default restores the default min/max
values of the highlighted parameter.
6. To stop the plot function for analysis, select Pause. Resume
will restart the Live Plot.
7. To switch the display mode from Live Plot display back to a
text display, select the More soft key twice from the Live Plot
graph and then select Data List.
8. From the Snapshot standby mode, the Live Plot function also
is available by selecting the More soft key. While viewing
Live Plot, a snapshot also can be triggered the same way it
is in the Snapshot mode.
NOTE: Be sure to update your Tech 2 with the latest TIS software as soon as it is available.
RETURN TO MAIN MENU
TECH 2 MAIN MENU & LIVE PLOT
Figure VIIA-21
Live Plot screen soft key options
Figure VIIA-22
Min/Max Adjustment screen
Figure VIIA-23
"Learn" and "Learn All" soft keys
on Min/Max Adjustment screen
Figure VIIA-24
Live Plot "Resume" soft key
Figure VIIA-25
Live Plot "Data List" soft key
Figure VIIA-26
Data Snapshot Record screen
2005 Tech 2 User's Guide VII - 13