GMC Tech 2 User Manual page 120

SECTION VIID
CANdi Module Software Updates
IMPORTANT
You must update the PCMCIA (32-megabyte) card first before connecting the CANdi module to the
Tech 2. Always disconnect the CANdi module from the Tech 2 before downloading any software
updates to the PCMCIA card.
The CANdi module has the capability to store three different software versions.
Software updates for the CANdi module are stored on the 32-megabyte PCMCIA card. The CANdi module
will be automatically updated when it is connected to the vehicle's DLC and the Tech 2 is powered on.
When a CANdi module is updated, the screen shown in
progress will be displayed on the Tech 2 screen. If any problems occur concerning the update, they will be
displayed on the Tech 2. (Refer to Section VI - Troubleshooting.)
After a successful update, the current CANdi software version can be obtained by selecting:
F9: CANdi Diagnostics - from the Tool Options menu
F0: POST Results - from the CANdi Diagnostics menu
The CANdi POST Results screen
problems during the software update or start-up sequence. Customer Support may also use the
information from the CANdi POST Results screen, if you encounter any problems during an update.
The latest CANdi software version will be included in TIS software and will be automatically downloaded to
the PCMCIA card during a software update. Make sure you have the latest version of TIS software on your
terminal.
Figure VI-25
(Figure
(Figure
(Figure VI-31) can also be used to determine if the module had any
will be displayed. Software update
VI-29)
VI-30)
2005 Tech 2 User's Guide
RETURN TO MAIN MENU
CANDI MODULE
VII - 70