GMC Tech 2 User Manual page 56

SECTION VIIA
F0: Set Clock
After you select F0: Set Clock from the Tool Options menu
menu (Figure VIIA-4) appears, you can set the internal Tech 2 real-time clock in two ways:
1. Use the up and down arrow keys to move the cursor to desired selection. Press [ENTER] to change the
value. Each time [ENTER] is pressed the value will be increased by one unit until a preset maximum
unit is reached. Once all correct values are entered, press the Set Clock soft key to save all changes.
2. Use the function key of the desired selection to change an incorrect value. Each time the function key is
pressed the value will be increased by one unit until a preset maximum is reached. Once all correct
values are entered, press the Set Clock soft key to save all changes.
Figure VIIA-4
Set Real-Time Clock menu
Tool Options continued on next page...
TECH 2 MAIN MENU & LIVE PLOT
(Figure VIIA-3) and the Set Real-Time Clock
2005 Tech 2 User's Guide
RETURN TO MAIN MENU
VII - 6