Configuring Audio For Hdmi - HP Touchsmart TM2 User Manual

NOTE:
separately).
The computer can support one HDMI device connected to the HDMI port, while simultaneously
supporting an image on the computer display or any other supported external display.
To connect a video or audio device to the HDMI port:
1.
2.
3.

Configuring audio for HDMI

To configure HDMI audio, first connect an audio or video device, such as a high-definition TV, to the
HDMI port on your computer. Then configure the default audio playback device as follows:
1.
2.
3.
To return audio to the computer speakers, follow these steps:
1.
2.
3.
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
To transmit video signals through the HDMI port, you need an HDMI cable (purchased
Connect one end of the HDMI cable to the HDMI port on the computer.
Connect the other end of the cable to the video device, according to the device manufacturer's
instructions.
Press the switch screen image
devices connected to the computer.
Right-click the Speakers icon in the notification area, at the far right of the taskbar, and then click
Playback devices.
On the Playback tab, click either Digital Output or Digital Output Device (HDMI).
Click Set Default, and then click OK.
Right-click the Speakers icon in the notification area, at the far right of the taskbar, and then click
Playback devices.
On the Playback tab, click Speakers.
Click Set Default, and then click OK.
key on the computer to switch the image between the display
Video 41