Connecting To An Existing Wireless Network; Setting Up A Wireless Network - HP Touchsmart TM2 User Manual

Table of Contents

Advertisement

NOTE:
To use the WLAN device in your computer, you must connect to a WLAN infrastructure (provided through
a service provider or a public or corporate network).

Connecting to an existing wireless network

To connect the computer to an existing wireless network, follow these steps:
1.
2.
3.
4.
5.

Setting up a wireless network

To set up a WLAN and connect to the Internet, you need the following equipment:
The illustration below shows an example of a wireless network installation that is connected to the
Internet.
NOTE:
synchronized. To synchronize your computer and wireless router, turn your computer and wireless
router off and then back on.
As your network grows, additional wireless and wired computers can be connected to the network to
access the Internet.
For additional help in setting up your WLAN, refer to the information provided by your router
manufacturer or your ISP.
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
The terms wireless router and wireless access point are often used interchangeably.
A large-scale WLAN, such as a corporate or public WLAN, typically uses wireless access points
that can accommodate a large number of computers and accessories and can separate critical
network functions.
A home or small office WLAN typically uses a wireless router, which allows several wireless and
wired computers to share an Internet connection, a printer, and files without requiring additional
pieces of hardware or software.
Be sure that the wireless device is on (wireless light is off). If the wireless light is amber, press the
wireless
key.
Click the network icon in the notification area, at the far right of the taskbar.
Select a network to connect to.
Click Connect.
If the network is a security-enabled WLAN, you are prompted to enter a network security key, which
is a security code. Type the code, and then click OK to complete the connection.
A broadband modem (either DSL or cable) (1) and high-speed Internet service purchased from an
Internet service provider (ISP)
A wireless router (purchased separately) (2)
The wireless computer (3)
When setting up a wireless connection, be sure that your computer and wireless router are
Creating a wireless connection
19

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents