Preparations - KEDDY SK1000 Instalation Instructions

SURROUND INSTALLATION
Keddys fireplace can be used as a fireplace where you build your own surround around it or you in-
stall it into an existing fireplace. We have gathered the nessecery measurements for building your own
surround below.

PREPARATIONS

Before beginning the installation of an insert in an existing open fireplace, you must ensure that the
existing chimney is smoke-tight. In this instruction, we describe typical installations of Keddy's fire-
place inserts with this parameter fulfilled. Since existing open fireplaces vary in design, this should be
considered as an installation guide and we will discuss two installation variants in the instructions.
Keddy's fireplace inserts are delivered as standard with a 45 degree angle connection sleeve. If you
want to connect vertically or straight back, you need an angle sleeve (accessory). The installation
guide begins on the next page. Alternative 1 is described first, followed by alternative 2.
Mesaurements for mounting wall
frame.
SK1000: B 548 H 500
SK2000: B 648 H 565
- 5 -