Installation; Power Requirements; Line Voltage Selection Reference - Garner HD-2 Series Operation And Installation Manual

INSTALLATION

All trouble shooting and wiring checks must be performed by a
qualified electrician or authorized plant personnel.

Power Requirements

It is important to ensure correct power is applied to the degausser. Unless otherwise
specified and noted on the power specification label on the back of the HD-2, the HD-2
is factory configured for 120VAC. Check the power specifications label to ensure the
factory configured HD-2 input voltage is configured to match the voltage from the power
mains the HD-2 will plug into. Call Garner Products, Inc. if the voltage listed is not
compatible with your voltage or if you have any questions. International customers call
011 916 784-0200.

Line Voltage Selection Reference

The Line Voltage Selection Reference is a guide for configuring the voltage jumper to
the correct tap of the transformer. This allows the HD-2 to be used world wide under a
variety of voltages. For detailed instruction please see the "Input Voltage Configuration"
section of this manual.
All trouble shooting and wiring checks must be performed by a
qualified electrician or authorized plant personnel.
HD-2 Operation and Installation Manual Page 3