Advertisement
CORTO-C
COMPONENT LIST
3 x Stainless steel legs
3 x Stainless steel machine screws, M5 x 25mm
3 x Stainless steel spring washers
1 x Black polytube 40mm
4 x Black polytube 5mm, to hold wire in masonry slot
TRANSFORMER KIT *TO BE ORDERED SEPARATELY
1 x Ecotimer
1 x Electronic transformer
CORRECT USE OF WATERPROOF WIRENUTS
• Strip wires 12.7mm (1/2").
• Align any frayed strands or conductors.
• Pre-twisting unnecessary. Place stripped wires together with
ends of insulation even.
• Twist connector onto wires pushing firmly until hand tight.
Do not over torque.
• Wipe sealant in and around conductors and connector
opening while tightening. DO NOT REUSE
CLEANING RECOMMENDATIONS
This bathroom product should not be cleaned with abrasive materials eg. steel wool/scourers. Do not
use any corrosive or abrasive cleaning agents containing acids or scouring agents. Do not use organic
solvents (terps, meths, thinners) to clean matte black and white coated towel rails. Bleaches can also
discolour products and therefore should not be used.
Use a soft cloth moistened with warm soapy water or a silicone based household wax/polish such
as SC Johnson 'Pledge' for general polishing and cleaning of the appliance. Fine scratching can
be removed using the correct metal polish. Recommended brands are 'Autosol' and 'Brasso Paste',
both available in tubes from supermarkets and car care outlets. Damage caused by any improper
treatment is not covered by by the product warranty – refer to Warranty Conditions on the last page.
ELECTRICIANS please ensure a copy of the installation
instructions is left with the end user for future reference.
650, 850
3 x Waterproof wirenuts
3 x Large zinc plated self tapping screws, pan head 10g x 50mm
3 x Plastic rawl plugs, for installation on masonry walls
1 x Square, 2 x Round black polycarbonate bushes
3 x Stainless steel grub screws, 4g x 1/4" countersunk head
2 x 3m lengths 1mm 2 appliance wire 90 deg C
FIGURE 7
CORTO-C INSTALLATION GUIDE | PAGE
4 OF 6
Advertisement
