RCA HSWIFI1 User Manual page 6

The App will prompt you to make sure your
camera is on. If you haven't already turned it on,
press the Power button on the right side of the
camera (the camera's LED lights up), then press
the Next step button in the App.
The next screen in the App lets
Add Camera
you name the camera you're
setting up and prompts you
to scan the QR code on the
Scan QR code located
on bottom of camera
bottom of the camera.
Press to open
QR code scanner
ID:
To name the camera you're
Camera name: Front Door
setting up: Press in the
Next step
Camera name field and enter
the name you want to use.
To scan the QR code on
the WiFi camera: Find the
QR code on the bottom of
the WiFi camera. Position
your smartphone or tablet so
that its camera can scan this
QR code. Then press where
indicated in the App to scan
this QR code.
6
After you've scanned the QR
Configure WiFi
code on the bottom of the
1. Your camera should be plugged in and turned ON.
Press the "Set" button on the bottom of your camera for 1
second.You will hear one beep and the LED will start
blinking red.
WiFi Camera, the App will
2. Choose WiFi SSID (or network name) and enter
password below. Make sure you enter the info correctly.
If your WiFi SSID does not have a password, you will need to
create one. This is for your safety and security. Consult the
ask you to press the Set Up
user guide for your WiFi router/AP to add a password.
Helpful Hint: Click on the lock icon in the password area
to hide or display text.
3. After you've entered your WiFi info below, press "Next
button on the bottom of the
step." Your camera will begin connecting to your WiFi
network. This can take 2–3 minutes to complete.
When you hear two beeps and the LED turns solid green,
your camera is successfully connected and ready for you to use.
camera and enter the name
(WIFI SSID) and password of
your WiFi network.
Next step
Find the SET button on the
bottom of the WiFi camera.
Press it until the camera
gives an audio signal.