RC Logger RC EYE One Operating Instructions Manual page 11

&KDUJLQJ WKH ÁLJKW EDWWHU\
Do not use any computer or notebook USB port to connect power to the USB charger
EHFDXVH LW PD\ EH GDPDJHG 86% SRUWV DOVR XVXDOO\ DUH OLPLWHG WR D FXUUHQW RI PD[
500 mA.
1. Use a suitable plug-in mains adapter or a cigarette lighter adapter with one USB output socket each
(output 5 V/DC, at least 1.5 A).
2. Connect the charger from the delivery (1) to a USB mains adapter (2) or a cigarette lights USB adapter
with its USB plug. The plug-in charger (or adapter) must have a current resilience of at least 1.5 A!
3. 7KHQ FRQQHFW WKH SOXJLQ FKDUJHU WR D PDLQV VRFNHW 7KH /('V  LQ WKH FKDUJHU ÀDVK
4. &RQQHFW WKH ÀLJKW EDWWHU\  WR WKH FKDUJHU VRFNHW  LQ WKH FRUUHFW SRODULW\ 2EVHUYH WKH SOXJ FRQWRXU
for this. If the battery is not defective (high-Ohmic/interrupted) and mains supply is warranted, charging
commences. This is indicated by the two red LEDs (3 = charge indicator).
The following LED displays are possible:
The red LED is permanently lit:
7KH UHG /(' ÀDVKHV
Red LED off:
The charging process is running
Defective battery and/or bad contact of the plugs
Charging end is reached or no rechargeable battery or a fully
charged battery is connected
11