FAA APPROVED
INSTALLING THE EGT-701 SCANNER®
EDM-830 system mounts in a 3.125 inch instrument panel hole in either a portrait or landscape position
depending on panel hole location.
By holding the Step button (white) for approx. 10 seconds and arrow will appear on the display showing
which way is up. Use the LF button to index the arrow. When the proper position is achieved, press the
step button and the system will reboot in the direction chosen.
INSTALLATION MANUAL FOR THE EGT-701 Report 103
EDM-830 TFT Flat panel display
EDM-830 TFT Flat panel display
Landscape
1/20/09
Portrait
Rev-E
Page 15 of 30
switc
switc