Mount Cel-Fi Go; Connect Outdoor & Indoor Antennas To The Cel-Fi Go Unit; Plug In Cel-Fi Go & Select Mode; Tips & Tricks - CEL-FI GO Quick Start Manual

3

Mount CEL-FI GO

OUTDOOR ANTENNA
CEL-FI GO
OPTIONAL
LOCATION
Find a good mounting location
in your vehicle. Location
should have some airflow,
and be safe from bumps and
external objects.
Make sure the unit is within
cable range of the 12V power
supply on your vehicle.
4
Connect Outdoor & Indoor Antennas
to the CEL-FI GO Unit
OUTDOOR ANTENNA
TOP VIEW
5
Plug in CEL-FI GO & Select Mode
OUTDOOR ANTENNA
Press the MODE button on the unit
to select desired scanning mode.
Status Indicator will blink during the
setup process, and may take a few
minutes to complete.
(OPTIONAL: use your smartphone
to select mode. Download the
CEL-FI WAVE app, and follow the
NETWORK STRENGTH
on-screen instructions.)
6
Tips & Tricks
• Keep Outdoor and Indoor Antennas separated/
isolated from each other for best performance
• For best performance, the cable between the
Outdoor Antenna and GO unit should be as short as
possible
• Use sealant if any connections are exposed to
elements
7

CEL-FI WAVE

For more CEL-FI GO features, go to App Store or Google
play and download the mobile CEL-FI WAVE app.
(NOTE: If you do not have a compatible smartphone,
go to cel-fi.com/wave to download the Desktop app.)
SMART SIGNAL REPEATER
CEL-FI GO
Best to make sure all cable
lengths support the intended
mounting location BEFORE
permanent mounting.
DO NOT plug in at this time.
CEL-FI GO
STATUS
INDICATOR
RIGHT SIDE:
MODE
LEFT SIDE:
CEL-FI GO
MODE
4G/4GX
(*NOTE: if Error, go to troubleshooting
at cel-fi.com/support)
INDOOR
ANTENNA
INDOOR
ANTENNA
Outdoor Antenna Connector
Indoor Antenna Connector
12V POWER SUPPLY
INDOOR
ANTENNA
STATUS
INDICATOR
AUTO
3G
Boosting 3G
STATUS
Boosting 4G
INDICATOR
Error*
www.Cel-Fi.com.au
MODE
SELECT
BUTTON