Moving Your Wine Cooler; Power Failure; Vacation Time; Disconnecting From Power - Inalto IWCD46 User Manual

Moving Your Wine Cooler

If you need to move your Wine Cooler to another location you should
follow the steps outlined below.
o Remove all items from the Wine Cooler.
o Securely tape down all loose items such as the shelves inside of the
appliance.
o Turn the adjustable foot up to the base to avoid damage.
o Tape the door closed.
o Ensure the appliance stays secure in the upright position during
transportation. Also protect the outside of the appliance with a blanket
or similar item.

Power Failure

o If power is cut to the appliance, for a few hours it will be able to maintain
the temperature inside the cabinet. Providing that the number of times
that the door is opened is kept to a minimum.
o If the power cut is for longer than a few hours, then you will need to store
the contents in an alternate location to prevent them being affected by
temperature rise.
wait 5 minutes before restarting the Wine Cooler. If you attempt to restart before this
time delay, the compressor could be damaged.

Vacation Time

Short vacations: Leave the Wine Cooler in operation for holidays of less than 3 weeks.
Long vacations:
o If your appliance is not going to be in use for a period of time, you should
remove the bottles of wine and switch off the appliance
o The interior should be cleaned with a solution of bicarbonate of soda
and lukewarm water.
o The interior should then be thoroughly dried.
o To prevent mould growth, the door should be left slightly ajar.

Disconnecting From Power

o If the unit is unplugged, or there is a power cut, you must wait for 5
minutes before restarting. Attempting to restart the Wine Cooler before 5
minutes has elapsed, may cause it not to function.
.19.
INSTRUCTION MANUAL