IMPORTANT: If the appliance is not level, then the door and door seal may be
IMPORTANT: Do not move the appliance when the feet are adjusted high.
Installing The Handle
● Remove the door Gasket slightly to expose the two screw holes.
● Fix the Handle by screwing the two Handle Screws tightly, the Handle Screws with
Washers are pre-installed inside the screw holes, pls.do not unscrew the Handle
● Replace the Gasket.
LOCK & UNLOCK THE DOOR (FOR OPTION)
● Lock is an optional function. If your Wine Cooler has such function, a key should be
attached inside the packing of this Manual.
● Insert the key into the lock and turn it counter-clockwise to unlock the door. To lock
it, please turn clockwise. Please save the key well.
OPERATING THE WINE COOLER
WORKING CLIMATE
•
The appliance is designed for operating from SN to N climate (see below climate class
chart). It is recommended to maintain the ambient around 22-25°C which helps the
appliance working with low power consumption.
Klimaklasse
SN
N
ST
T
Gasket
Handle
Washer
Handle Screws
Romtemperatur
10 - 32 °C (50 ºF-90ºF)
16 - 32 °C (61 ºF-90ºF)
16 - 38 °C (61 ºF-100ºF)
16 - 43 °C (61 ºF-109ºF)
.07.
INSTRUCTION MANUAL