3
I M P O R T A N T !
C A U T I O N !
I M P O R T A N T !
Safety instructions
This device has been built according to the latest technical stan-
dards and generally accepted safety regulations. Nevertheless, it
can constitute a risk to the operator or third parties and a hazard to
the device itself or other equipment during use
Only use the device if in perfect working order and for its in-
(1)
tended purpose. You must always pay attention to the instruc-
tion manual and safety instructions therein and be aware of the
risks! Repair any faults which could affect the device's safety
immediately by yourself or have these repaired.
The device should only be used with tools for grinding and pol-
ishing available at JOKE
be deemed to be contrary to its intended purpose. The manu-
facturer cannot be held liable for any resulting damages. The
risk is borne solely by the user.
Correct use also includes compliance with the instruction man-
ual and an observation of the care and maintenance condi-
tions
.
Keep the instruction manual handy at the device's place of use.
(2)
Pay attention to and observe generally applicable statutory
(3)
and otherwise binding regulations relating to accident preven-
tion and environmental protection in addition to the information
provided in the instruction manual!
All personnel commissioned to work on or with the device must
(4)
have read this instruction manual, and particularly the safety in-
structions chapter, before starting work. This applies especially
for personnel who only work with the device occasionally.
Stop the device immediately should you notice changes to the
(5)
device or its operating behaviour that are relevant to its safety.
Have these remedied before restarting work
Do not carry out any modifications, additions or conversions to
(6)
the device! This also applies to the installation and adjustment of
safety equipment
JOKE
Instruction Manual Multimaster Grinding and Polishing System
®
for surface finishing. Any other use will
®
.
.
.
4
Need help?
Do you have a question about the Multimaster and is the answer not in the manual?
Questions and answers