Installation; Step 1. Install The Software - Ricoh G413 Supplemental Operating Instructions

Installation

This section explains how to install the hardware and software required to run VRS. The
installation process consists of three basic steps:
Install the VRS software on your PC.
1
Install the Adrenaline Hardware Accelerator in your PC.
2
Attach the scanner to your PC.
3

Step 1. Install the Software

This section explains how to install the VirtualReScan software. The default installation folder is
C:\ProgramFiles\Kofax\Imgctls, although you can install to another folder. To install VRS under
Windows NT, you must have administrator rights.
If an earlier version of Kofax ImageControls
completing the installation procedure in this section.
! To install the VRS software
Verify that the VRS installation CD is inserted in the appropriate CD-ROM drive.
1
Select Start|Run and do one of the following to select the path for the setup file on the
2
VRS installation CD. Select the path as D:\Setup.Exe, where D: is the CD-ROM drive:
a Use the Browse button to select the path.
b In the text box, type in the path.
Click OK.
3
Figure 1. VRS Installation Program Path
The VirtualReScan Setup dialog box opens, as shown in Figure 2.
Figure 2. VirtualReScan Setup Dialog Box
Kofax Image Products
exists on your computer, you can upgrade it by
®
VRS Getting Started Guide
3