Table of Contents
Advertisement
Connecting two ET6 expansion modules
Very important when two expansion modules are connected to the phone:
•
The modules must be daisy-chained, as shown in Fig. 8. If they are not,
the phone will not be able to find and identify the function keys, and you will
not be able to use them. Do not use a USB hub or, if the phone has more
than one USB port, do not connect expansion modules to more than one
port (Fig. 9).
•
A separately available power adapter must be attached to the second
module in the chain, as shown in Fig. 8.
Fig. 8
1. Connect the expansion modules to each other, as shown in Fig. 8.
2. Attach the power supply to the second module, as shown in Fig. 8.
3. Connect the power supply to the wall outlet.
4. Connect the first expansion module to the phone, as shown in Fig. 6 or 7.
VTech phone
11
Advertisement
Table of Contents
