Siting The Psx; Mains Fuse - Cyrus 1 Manual

MAINS CABLE
The mains cable supplied with the unit is a three core type, and has an
integral plug attached. Units supplied for the UK market do not have a
mains plug, and therefore, an appropriate plug must be wired according to
the colour-code below and on the label attached to the lead.
All types of mains lead supplied (all countries), have a moulded IEC plug
which matches the IEC socket of your PSX power supply.
FITTING A MAINS PLUG (UK ONLY)
The mains supply cable should be attached to a standard 13 Amp mains
plug that must be fitted with a 5 Amp fuse.
The wires in the mains supply cable are colour coded as follows;
• BROWN = Live
BLUE = Neutral
•
GREEN/YELLOW = Earth
•
The Brown wire must be connected to the terminal that is marked "L" or
coloured RED. The Blue wire must be connected to the terminal that is
marked "N" or coloured BLACK. The GREEN/YELLOW wire must be
connected to the terminal that is marked with the letter "E" or coloured
GREEN or coloured GREEN AND YELLOW.

MAINS FUSE

• UK/Europe - 220/240V = T3.15A/20mm
• N.America/Far East- 100/120 = T4A/20mm

SITING THE PSX

As with your Cyrus amplifier, the PSX may be free standing or stacked in
an audio rack. The PSX must be sited in a position which allows adequate,
unrestricted airflow around the unit. It should never be placed in a position
close to a source of heat, or exposed to direct sunlight for long periods of
time.