Table of Contents
Advertisement
Settings
Under Settings you can view and edit information for the BIT app,
your ELD hardware, and your driver account information. The current
version number of the app installed on your phone or tablet can be
found at the bottom of the screen.
General Settings
Use "Keep screen on" for the BIT app to keep your phone or tablet
display on at all times so you can see your Available Hours while
driving.
Your data is automatically synced with the web portal at
blueinktech.com when you log into or out of the app. To manually
sync your data at any time, tap "Send" next to "Upload logs to web".
You must use cellular data or be connected to wifi for data to sync.
ELD Adapter Settings
Most of the data items on this screen are based on
information sent from the ELD adapter to which your app is
connected.
Preferred Device
You can set the currently connected ELD as your Preferred
Device, which will reduce the time it takes the app to connect
to that ELD for future use. This eliminates the need for your
phone or tablet to make a full sweep of wireless frequencies
before the connection process starts.
Note that once a Preferred Device has been set, the app will
only connect to that device. If you use multiple ELDs you
should not set a Preferred Device.
To change your Preferred Device, toggle to the off position.
Once you are connected to a new ELD you can set it as your
new Preferred Device.
Light Settings
You can adjust your ELD adapter light settings to keep the LED
on or off. In the default off setting, the light on the ELD will
go off after 60 seconds of being in the same status condition.
You can use the LED Dimmer to adjust the brightness of the
ELD's light for daytime or nighttime driving.
19
Advertisement
Table of Contents
