AVLink HRM-2514 User Manual

HDMI
SELECTOR
(HRM-2514)
(HRM-2518)
USER MANUAL
HRM-2514 / HRM-2518

Package Contents -

1 AVLINK HRM-2514 or HRM-2518 HDMI
Selector
1 user manual
1 power adapter DC 12V/1.25A
1 remote controller
1 RS-232 1.8M cable (DB-9 Male to Female)
2 rack rails, 8 screws for HRM-2518 only
Any thing missed, please contact with your vendor.
-1-

Features

Support resolution up to 4K x 2K@60Hz (8-bit) or
1080P@60Hz (12-bit)
HDCP2.2/HDCP1.4 Compliant
Support HDR
Compliant with the specification of HDMI.
Support RS-232 control.
Remote controller for operation.
Hot pluggable.
Auto skips over the power-off and unplugged cable.

Specification

Function
HDMI Input Connector
(A-Type Female)
HDMI Output Connector
(A-Type Female)
On Line
LEDs
Selected
Select Switch
RS-232 Connector
Max Pixel clocks
Power Adapter (Min.)
Housing
Weight
Dimensions (LxWxH) mm 200x75x45 342x104x45

Hardware Requirements

V1.0
Requirement specifications
One LCD, PLASMA TV or projector
HDTV
with HDMI input function.
DVD player
HDMI output function.
/ TV Receiver
Cable HDMI male to male Standard cable.
FRONT VIEW
1. Port Selection Switches (Manual type)
2. Port LEDs
HRM-2514 HRM-2518
4 8
1
4 8
4 8
3. IR Receiver
4 8
1x DB-9 Female
600MHz
Rear View
DC 12V DC 12V
1.25A 1.25A
Metal
600g 1210g
1 Power Supply
2. RS232 Port Connector
3. HDMI OUT Port Connector
4. HDMI IN Port Connectors
-2-
Press the switch to access the selected DVD
player/TV receiver.
All the red LEDs flash while the power adapter is
well connected.
Green LEDs light up while the DVD player/TV
receiver has well connected and starting
operation.
Red LEDs light up while the DVD player/TV
receiver has successfully been selected.
Take aim at IR receiver with remote controller.
Plug the DC 12V power adapter.
Plug the RS-232 cable.(Optional)
Plug the monitor cable.
Plug the extension cables from HDMI port of HDMI
output port of device.
-3-