Table of Contents
Advertisement
Message
REPLACE PCU
TONER LOW
xxx
WARMING UP
WASTE TONER
ALMOST FULL
WASTE TONER
FULL
Note
If you cannot solve the problem by taking above actions, turn the printer
power off and then back on again. If this doesn't clear the error message, write
down the error number and the message, and contact your sales or service
representative.
Error & Status Messages on the Operation Panel
Description
The photoconductor unit is
nearly at the end of its life.
Indicated toner is low or
runs out.
The printer is preparing for
printing.
The printer adjusts itself
regularly to maintain print
quality. (This message
might appear while print-
ing.)
The waste toner bottle is
nearly full.
The waste toner bottle is
full.
Comments
If printed side gets dirty, re-
place the photoconductor
unit.
P.48 "Replacing the
Photoconductor Unit"
Replace the indicated toner
cartridge.
P.45 "Replacing
the Toner Cartridge"
Wait until the printer is
warmed up.
It is not an error message.
The printer is working prop-
erly. Just wait a while.
Replace the waste toner bot-
tle.
P.53 "Replacing the
Waste Toner Bottle and Charg-
er"
Replace the waste toner bot-
tle.
P.53 "Replacing the
Waste Toner Bottle and Charg-
er"
4
31
Advertisement
Table of Contents
