Honda Automobiles HF2216 Operator's Manual page 31

Table of Contents

Advertisement

EN 30
5.4.8 E
ND OF MOWING
When you have finished mowing, disengage the blades, lower the engine speed
and ride the machine with the cutting deck in the highest position.
5.4.9 E
ND OF WORK
Stop the machine, put the accelerator lever in the «SLOW» position and turn off
the engine by putting the key into the «OFF» position.
This automatically closes the fuel valve.
WARNING!
!
unattended!
5.4.10 C
LEANING AND STORAGE
After each mowing, clean the outside of the machine, empty the grass-catcher
and shake it to remove residual grass and earth.
WARNING!
!
tainers full of cut grass inside a room.
Clean the plastic parts of the body with a damp sponge using water and deter-
gent, taking care not to wet the engine, the electrical parts or the electronic card
located under the dashboard.
IMPORTANT
body and engine!
For washing the inside of the cutting deck and the collector channel the machine
must be on firm ground with:
– the grass-catcher or stone-guard fitted;
– the operator seated;
– the engine running;
– the transmission in neutral;
– the parking brake engaged;
– the blades engaged.
Always take out the ignition key if leaving the machine
Always empty the grass-catcher and do not leave con-
Never use hose-nozzles or harsh detergents for cleaning the
HOW TO USE THE MACHINE

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hf2220

Table of Contents