Download Print this page

Advertisement

Quick Links

O W N E R ' S M A N U A L
1. Read this manual carefully before starting assembly. Read each step completely before beginning
each step.
2. Some smaller parts may be shipped inside larger parts. Check inside all parts and cartons
before assembling or ordering parts.
3. T o make assembly of your Yard Guard easier, c h eck all cartons for kits.
All hardware may not be located in one kit.
4. Do not tighten hardware until instructed to do so. If hardware is tightened too soon, mounting holes
may not align and parts may not easily fit together . Leave locknuts slightly loose until you are instructed to
tighten them. You will need a 5/8" wrench, two 1/2" wrenches and a
5. Save these instructions and your proof of purchase (receipt) in the event that the manufacturer
has to be contacted for replacement parts.
Please Do Not Return This Product To The Store!
Contact Escalade
Phone:
1-888-USA-GOAL
Fax:
1-866-873-3536
E-mail:
basketball@escaladesports.com
Mailing Address (correspondence only):
Escalade Sports
PO Box 889
Evansville, IN 47706
Please visit our World Wide Web site at:
ON-LINE TROUBLE SHOOTING
ON-LINE PARTS REQUESTS
ADDITIONAL ESCALADE® SPORTS PRODUCT INFORMATION
Escalade
®
Sports products may be manufactured and/or licensed under the following patents:
6419596, 6179733, 5919102, 5071120, 4798381, 4424968, D326128, 7244046
Additional patents may be pending. One or more of the listed patents and/or pending patents may cover specific product.
®
Sports customer service department at:
Toll – Free !
Toll – Free !
www.goalrilla.com
TECHNICAL ASSISTANCE
FREQUENTLY ASKED QUESTIONS
MODEL NO.
B2 800W-2
B2
Yard Guard
©
2017 Escalade Sports
2L-7616-01
®

Advertisement

loading
Need help?

Need help?

Do you have a question about the YARD GUARD B2800W-2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for GOALRILLA YARD GUARD B2800W-2

  • Page 1 Toll – Free ! E-mail: basketball@escaladesports.com Mailing Address (correspondence only): Escalade Sports PO Box 889 Evansville, IN 47706 www.goalrilla.com Please visit our World Wide Web site at: ON-LINE TROUBLE SHOOTING TECHNICAL ASSISTANCE ON-LINE PARTS REQUESTS FREQUENTLY ASKED QUESTIONS ADDITIONAL ESCALADE® SPORTS PRODUCT INFORMATION...
  • Page 2 -Remove all pole pads before installation. The lower pad of the Goalrilla pole pads are not compatible with the Yard Guard, you will need to replace with the provided lower pad and then place your existing Goalrilla pad on top as normal.
  • Page 3 YARD GUARD BRACKET NOTE: Two brackets (#1 & #2) are required. Bracket #1with three holes goes on top of bracket #2. A. Before assembly peel and stick washers to Brackets Protective Surface on this side will face the back of #1 &...
  • Page 4 Two 7/16” Wrenches and one 9/16” Wrench will be required for the following steps. 1. Taking the longer U-bolt #3 slide it over the pole as shown Protective Surface on below, Detail 1 . Please be careful not to scratch the paint brackets goes facing from your system, packaging foam can help with this.
  • Page 5 FOR ANY OTHER GOALRILLA BASKETBALL SYSTEM CONTINUE TO PAGE 6. NOTE: To find your model number refer to your Basketball systems owner’s manual. Alternatively, the Goalrilla basketball units will have a sticker on the back of the pole with the model number (starts with the letter B).
  • Page 6 6. Using a ladder take the upper pole bracket #16 with Protective Protective Surface surface facing the pole, slide the shorter U-bolt #15 through bracket to attach the Nets as shown in Detail 4 . Attach nuts so that the bracket may still move up and down. Carefully position assembly so that net is fairly tight and most of the slack is removed.
  • Page 7 PARTS TO ATTACH TO “FT” SERIES MODELS Tower Bracket 2S-9419-00 4A-8245-00 QTY.2 QTY.1 HARDWARE TO ATTACH TO “FT” SERIES MODELS 3/8-16 X 1” NYLON BOLT 1B-7169-00 QTY.6 5/16-18 LOCKNUT 5/16-18 X 1 1/4" BOLT (ZINC) 2B-6009-02 1B-7168-00 QTY. 4 QTY.2...
  • Page 8 INSTALLATION FOR MODELS: B3015, B3016 & B3017 (FT SERIES) OVERVIEW Brackets to hold the yard Guard net will be installed on the to the upper poles as shown INSTALLATION LOCATION STEP 1 Centering Set the Brackets (#21) on top of the Indentations upper posts making sure the two Centering Indentations on each bracket...
  • Page 9 TOWER The sheet metal Tower (#22) can flex to get wider or narrower, on units with a 72” or 60” backboard the Tower will need to be flexed out to fit the brackets. On units with a 54” backboard the Tower may need to be flexed in. NOTE: Tower will deform permanently.
  • Page 10 HARDWARE NEEDED (ACTUAL SIZE) NOTE: If you have a FT72 (72”backboard) continue with “Step for FT72”, on any other unit skip to step “FT54 & FT60”. 5/16-18 X 1 1/4" BOLT (ZINC) 5/16-18 LOCKNUT 1B-7168-00 2B-6009-02 QTY. 4 QTY. 2 STEP for FT72 Insert a bolt (#24) through the holes in each side of the tower followed by one nut (#25)
  • Page 11 16” From the base, continue this process at about 12” increments, until all 5 are used. Refer to Detail 8 - Detail 10. he lower pad of the Goalrilla pole pads are not 10. T compatible with the Yard Guard, you will need to replace with the provided lower pad #20 and then place your existing Goalrilla pad on top as normal.
  • Page 12 Storage instructions 1. First, make sure all male clips have been disconnected from their Figure 4 corresponding clips. Carefully lift the bottom tube of the Yard Guard upwards and toward the net. Gather the excess netting to the pole with one hand while using the other to grab the top storage Strap with the Plastic Clip.
  • Page 13 * R i m n o t s h o w n f o r c l a r i t y . WA RN 4L-8156- o l e o f P B a c k FRONT POLE...
  • Page 14 PARTS LIST FOR THE GOALRILLA YARD GUARD B2800-2 Key# Part # Description Qty. 4A-8119-00 Lower 3 hole bracket 4A-8120-00 Lower 1 hole bracket See U bolt section below 2B-6787-00 3/8” Washer no tape 2B-6785-00 3/8” Nuts for U bolts 8S-7934-00...
  • Page 15: Limited 1 Year Warranty

    LIMITED 1 YEAR WARRANTY This consumer warranty extends to the original consumer purchase of any Escalade Sports Product (hereinafter referred to as the “Product”). ® WARRANTY COVERAGE: Sports warrants to the original Consumer Purchaser that any Product of its manufacture is free Escalade ®...