Holder Assembly Cst; Disassembly Of Gear Assembly Rack F/L; Opener Door; Arm Assembly F/L - Philips DVP3350V/01 Service Manual

DISASSEMBLY AND ASSEMBLY OF DECK MECHANISM
2. Disassembly of Plate Top (Fig. A-2-1)
1) Separate the right part while leaning back the (B) part of
the plate top toward the arrow direction.
2) Separate the left part while leaning back the (B') part of
the plate top toward the arrow direction.
(Tool used: Tool such as (-) driver, auger, etc with pointed
or flat end)
CAUTIONS
Assemble while pressing the (C), (C') part after positioning
them as in drawing.
(B')
3. Holder Assembly CST (Fig. A-2-2)
1) First, separate the left part from the groove on the (D) part
of chassis while moving the holder assembly CST toward
the arrow direction.

Holder Assembly CST

2) Separate the right part from each groove of chassis.
CAUTIONS
Assemble by inserting the left part after inserting the
(E) part of the holder assembly CST into the groove on the
(E') part of chassis.
(C)
(B)
Chassis
(D)
4. Disassembly of Gear Assembly
Rack F/L (Fig. A-2-3)
1) Separate the hook (H3) while bending hook (3)
after moving the gear assembly rack F/L toward the arrow
(A) direction.
2) Separate the gear assembly rack F/L toward the arrow
(B) direction.
CAUTIONS
For re-assembly, mate the gear part of gear assembly
rack F/L to the gear drive.
(C')
Gear Drive
5. Opener Door (Fig. A-2-4)
1) Separate the opener door from the guide hole of
chassis while turning it clockwise.
6. Arm Assembly F/L (Fig. A-2-5)
1) First, separate the left part of the arm assembly F/L from
the groove of chassis while pushing the arm assembly
F/L toward the arrow direction.
2) Separate the right part from the groove of chassis.
7. Lever Assembly S/W (Fig. A-2-6)
1) Separate the lever assembly S/W while pushing it toward
the arrow direction after removing the hook (4) on the left
side of chassis.
4-5
Gear Rack F/L
Chassis
(H4)