Gear Drive/Gear Cam; Gear Sector; Brake Assembly Capstan; Plate Slider - Philips DVP3350V/01 Service Manual

DISASSEMBLY AND ASSEMBLY OF DECK MECHANISM
Gear Cam Hole(B)
Gear Cam Hole(C)
24. Gear Drive (Fig. A-7-1)/
Gear Cam (Fig. A-7-2)
1) Remove the washer (W2) and then disassemble the gear
drive.
2) Release the hook (H10) of the gear cam and then
disassemble it upward.
CAUTIONS
For the assembly, adjust both the gear drive hole (A) and the
gear cam hole (B) straightly and then line up the gear cam
hole (C) to the chassis hole.
25. Gear Sector (Fig. A-7-3)
1) Release the hook (H11) of the gear sector and then lift the
gear sector upward.
26. Brake Assembly Capstan (Fig. A-7-4)
Gear Drive Hole(A)
(H10)
Gear Cam
(Fig. A-7-2)
(W2)
Washer (W2)
(L2)
Gear Drive
(Fig. A-7-1)
Lever Brack
(Fig. A-7-8)
Chassis
Fig. A-7
1) Release the locking tab (L2) on the bottom side of the
plate slider and then disassemble it upward.
27. Plate Slider (Fig. A-7-5)
1) Disassemble the plate slider while lifting it up.
28. Lever Tension (Fig. A-7-6)
1) Release the lever tension from the guide (A) of chassis
while turning it counter-clockwise.
2) Disassemble the lever tension while lifting it up.
29. Lever Spring (Fig. A-7-7)
1) Release the (B) part of the lever spring from the guide (A)
of chassis while turning it counter-clockwise.
2) Disassemble the lever tension while lifting it up.
30. Lever Brake (Fig. A-7-8)
1) Disassemble the lever brake while lifting it up.
4-10
(H11)

Gear Sector

(Fig. A-7-3)

Brake Assembly Capstan

(Fig. A-7-4)

Plate Slider

(Fig. A-7-5)

Lever Tension

(Fig. A-7-6)
(B)

Lever spring

(Fig. A-7-7)
Base Loading
(A)