ALLEN & HEATH GLD Quick Start Quide
Hide thumbs Also See for GLD:

Advertisement

www.allen-heath.com
See where Input and Master
are by pressing Layer keys A,B,C,D
and reading the displays
To change the strip assignments use the
Setup/Control
screen

Sockets

See how the
are patched
using the
I/O
screen.
To change the socket assignments
touch and select from drop-down menu
Sel

Channel and Mix processing

Access the
Preamp
PEQ
Gain
LF
HPF
GATE
For GEQ on faders press GEQ Fader Flip - Master on last fader. RTA on strip meters. RTA follows current selected PAFL
Mix

Sends and Assignments

Access the
Normal mix mode (FOH)
IP 1
IP 2
IP 3
IP 4
IP 5
ON
+ press Mix
Mix
Channel faders
Master
Mix
view
IP 1
IP 2
IP 3
IP 4
IP 5
ON
PRE
+ press Sel
+ press Mix
All sends to one master

FX

Access the
> To send to an FX - press FX master
> To adjust FX parameters - press FX strip
> To return to the mix use related FXret channel

Link parameters

To
eg, 2 channels for stereo keyboard
Use the
Ganging
screen. Choose attributes.
Ganging does not link the Gains or Trims.
For the new user or guest engineer to start mixing with GLD. It assumes a mixer already configured for the show. To learn
more about configuration, memories and advanced functions read the on-screen Help Manual and User Guide AP8561.

Faders

push for second fuction
LM
HM
HF
IP 6
IP 7
IP 8
Aux1
hold
down
Assign Routing
Master faders
Access Aux, FX, Matrix mix on faders
IP 6
IP 7
IP 8
Aux1
hold
down
Pre/Post
all
Assign Routing
all
Master faders
Mix
Sel
Quick Start Mixing Guide
Alt View
User-defined backlight Colour
User-defined channel Name
I/O
Select rotary function
Touch to change
Name and Colour
Channel Name
For parameters on screen
Touch a parameter, adjust using rotary
Routing
St Aux 4
Check which
DCA and Audio Group assign
Main
Mix
active
LR
Aux2
Aux3
IP 4
DCA
ON
+ press Mix
Mix
Channel
Aux2
IP 5
Aux3
Aux4
IP 4
Sel
Mix
Copy parameters
To
> Hold down Copy and press the
Mix
> Now hold down Paste and press the
Alt View
Press
to view channel or socket
numbers or fader dB value in place of Name.
Set option in
Setup/Control
Stereo
Strip type
IP
St
DCA
NAME
GAIN
Aux
PRE
Assignment Mix type Pre/Post send
Processing
must be active
Opens on-screen Help Manual
?
Mix
is currently selected
IP 5
IP 6
IP 7
IP 8
Grp1
hold
down
Assign
Press
Mix
again to return to Main mix
Mix
view
IP 6
IP 7
IP 8
Aux1
hold
PRE
down
Pre/Post
Assign Routing
Channel faders
All sends from one input
Sel
or
Mix
key of the parameters to copy:
Copy GEQ here
Sel
Surface or Screen
Sel
= Single processing block
Sel
= All channel processing (not Gain or Trim)
= Sends and Assignments (not Pre/Post)
Sel
or
Mix
key of the strip to paste to
screen
Channel is Safe
from Scene recall
Assigned to one or
more DCA groups
Channel assignment
to current
Mix
DCA
Grp2
1
DCA2
all
Mix
Aux2
Aux3
Aux4
ON
Sel
Mix
Sel

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GLD and is the answer not in the manual?

Questions and answers

Table of Contents