Graco Endure 123 Owner's Manual page 10

5
CLICK
CORRECT
WRONG
10
Fitting the Child Restraint
with the 3-Point Lap
& Diagonal Seat Belt
(continued)
5 Fasten the vehicle seat belt
into the seat belt buckle
making sure the vehicle seat
belt and the buckle are in
line with each other. Please
contact the child restraint
manufacturer if in doubt
about this point.
Finish tightening the vehicle
seat belt until there is no slack
and the seat is held firmly
in place.
Now you can strap your child
into the seat. Make sure
the seat belt has not become
twisted. Also check that the
cover is not impeding the
movement or fit of the seat
belt webbing in any way.
Ensure rigid and plastic parts
of child restraint are not
liable to become trapped by
a movable vehicle seat or
vehicle doors.
To release your child restraint
follow the above instructions
in reverse order.